Welding Course in Philippines

Nowadays, the construction is booming in the Middle East, Asia, Australia, US and Africa. Due to the high cost of crude in the world market, many Petroleum Companies are expanding their businesses.

When the construction is booming, welders are in-demand. Most of the Certified Welders are engaged and some of the companies are in dilema on finding welders.

Welders are in demand nowadays, and the workforce is short.

Are you ready to be a welder?

Heats School of Welding Technology, Inc. is offering the following Welding Courses for those who want to become a Certified Welders.

1. SMAW Plate (Basic) - If you want to be a certified plate welder, this course is for you. You will learn how to weld in 1F, 2F, 3F, 1G, 2G and 3G position using SMAW. After completing the course, you are required to take the end of course assessment in Practical (2G & 3G) and theory. Once you passed the practical and written test, you will be given a Welder's Qualification Test (WQT) Certificate signed by Sr. Welding Inspector (CSWIP 3.2). If you want to have the National Certificate, you can go to TESDA for assessment. TESDA will give you National Certificate once you passed their assessment.

If you are 16 years old and above, fit to work, can read and write and can do basic math, this course is for you.

2. SMAW Pipe (Advance) - If you want to be a certified pipe welder, this course is for you. You will learn how to weld in 1F, 2F, 5F, 1G, 2G, 5G and 6G position using SMAW. After completing the course, you are required to take the end of course assessment in Practical (6G) and theory. Once you passed the practical and written test, you will be given a Welder's Qualification Test (WQT) Certificate signed by Sr. Welding Inspector (CSWIP 3.2). If you want to have the National Certificate, you can go to TESDA for assessment. TESDA will give you National Certificate once you passed their assessment.

If you are 16 years old and above, fit to work, can read and write, can do basic math, Completed the SMAW Plate or Can pass the 2G & 3G position using SMAW, this course is for you.

3. GTAW Pipe - If you want to be a certified pipe welder (TIG), this course is for you. You will learn how to weld in 1F, 2F, 5F, 6F 1G, 2G, 5G and 6G position using GTAW. After completing the course, you are required to take the end of course assessment in Practical (6G) and theory. Once you passed the practical and written test, you will be given a Welder's Qualification Test (WQT) Certificate signed by Sr. Welding Inspector (CSWIP 3.2). If you want to have the National Certificate, you can go to TESDA for assessment. TESDA will give you National Certificate once you passed their assessment.

If you are 16 years old and above, fit to work, can read and write, can do basic math, Completed the SMAW Pipe or can pass the 6G SMAW, this course is for you.

The Institutional Assessment shall be conducted in Heats Training Center and it shall be in accordance with ASME IX and Heats WPS.

The Instructors are Certified SMAW and TIG Welders in Plate, Pipe for Carbon Steel and Stainless Steel.

SO, WHAT ARE YOU WAITING FOR FOR? ARE YOU READY TO WELD YOUR FUTURE? CONTACT US AND BOOK NOW. Email us at pwtc_luzon@yahoo.com

Early birds are given 5% discount. All courses shall be conducted on January 2009.

Classifications of Welding Imperfections

1. Cracks

2. Solid Inclusions

3. Surface and Profile

4. Misalignment

5. Gas pores and porosities

6. Lack of fusions

7. Mechanical Damage

Weld and Joint Terms Definitions

1. A Weld - A union of materials, produced by heat and/or pressure

2. A Joint - A configuration ofmembers

3. A Weld Preparation - Preparing a joint to allow access and fusion through the joint faces

4. Types of Weld - Butt Weld, Fillet Weld, Spot Weld, Seam Weld, Edge Weld

5. Type of Joint - Butt Joint, Lap Joint, Tee Joint, Corner Joint

77 Days To Go for the Welding Inspector's Course

77 more days to go for the next Welding Inspector's Course. It shall be held on December 15-19, 2008 at Heats Training Room.
so what are you waiting for? Come and join us. email us for booking at pwtc_luzon@yahoo.com

ISO 9000 Awareness Course & IQA Course - 3 More Weeks to go!!!

Three more weeks to go for the ISO 9000 Awareness Seminar and Internal Quality Auditing course.
These courses are helpful for engineers and professionals who deal with ISO 9000 and Quality auditing.
If you are interested pls contact us for booking at pwtc_luzon@yahoo.com

Arc Starting With Different Polarities in GTAW

ELECTRODE POSITVE STARTING
Preheat Tungsten
Repeatable Starting
Cleans work on starts
Can damage tungsten tip
Good for AC TIG

ELECTRODE NEGATIVE STARTING
Preferred for precision DC
Repeatable starting
No cleaning on starts
No damage to tungsten
Acceptable for AC

A Word of Encouragement from a Client - Thank you for your support to HEATS!!!

Below is an excerpt of an email of one of our client.

Thank you very much for your support to HEATS. I hope that you can spread the word to others...

here it goes......

From: Christine Corales
Subject: Re: inquiry
To: pwtc_luzon@yahoo.com
Date: Thursday, September 25, 2008, 10:57 PM

Dear Mr. Jose,
It's actually my partner who will be attending the seminar. We will consider our choices. Thank you for all your help and for indulging in all my queries. Personally, I think what you are doing, offering alternative sources of income by giving proper training to fellow Filipinos, is very commendable. I do hope you get to hook up with other NGOs to promote your program.

Sincerely,
Christine Corales

10 ARC WELDER needed in UAE

Hey guys, UAE needs welders. The following details were taken from workabroad.com.ph

http://www.workabroad.ph/report_job_listing.php?ajid=190493

AL MANAF INTERNATIONAL MANPOWER CORPORATION

[ Agency's Profile ]
POEA License No. : 033-LB-101705-UL
Address : Unit 201 & 202 Vareb Mansion, 1679 A.Mabini Cor Malvar Sts. Malate Metro Manila
Tel. No. : (632)522 0117 / (632)5220153

10 ARC WELDER
Work Site: United Arab Emirates

Opening Date: Sep 16, 2008 Closing Date: Dec 16, 2008
For Manpower Pooling Only. No Fees shall be collected from the Applicant.
"BEWARE OF ILLEGAL RECRUITERS"

Prospective Principal/Project METALLIC EQUIPMENT CO. LLC
Qualifications Gender : Male
Age : 21 - 45 yrs old
Education : any
Yrs. of Experience : 2 yr(s)

Skills Required:


CANDIDATE SHOULD HAVE MINIMUM 12STD IN SCHOOLING
SMAW CERTIFICATE WITH 6G GRADE IN POSITION
SKILLED IN VERTICAL DOWN (DOWN HILL) AND VERTICAL UP (UP-HILL) WELDING
ADAPTABILITY AND GOOD COMMUNICATION SKILL