This is an excerpt from the email of Mr. Erwin. If you are qualified, please email Mr. Erwin directly..
Dear Sir,
We at CTSA provide highly qualified inspectors in various industries i.e. Petrochemicals, Oil & Gas, Offshore & Onshore, etc.Our Projects Area includes In-Kingdom & Outside Kingdom of Saudi Arabia.Pleased to inform that we are contineously hiring Inspectors (Welding, Mechanical, Electrical & Instrumentation, Civil, etc.).If there's anyone who are qualified and interested they can send their CV/resume by email erwin@ctsar.com or below fax. Please don't hesitate to contact us for further queries by checking our website www.ctsar.com.
Best Regards,
Erwin Dimaculangan
WELDING INSPECTORS' EQUIPMENT
ReplyDeleteThe equipment of a welding inspector will need to carry out inspection will depend partly on the work which is to be performed.For example,a welding inspector will not require a fillet weld gauge if only butt welds are being made.The client or specification will also determine the equipment to be used,e.g a portable arc monitoring unit(PAM unit) may be used to measure and record amperage and voltage instead of a hand held volmeter and ammeter.The equipment which may be used by a welding inspector are:- Steel rule,Flexible tape measure,Temperature indicating crayons or thermocouple (pyrometer),Bevel angle gauges,Root gap gauges,Fillet weld gauges for leg length and throat thickness,Misalignment gauge,Voltmeter,Ammeter,Polarity indicator,Height/depth gauge,Contour gauge,Torch or other light source,Modelling clay or resin,Magnifying glass-5x magnification,Marking crayon or paint stick.